智能系統高低溫環境試驗室

智能系統高低溫環境試驗室

 



 

1.技術參數

 

1.1 溫濕度檢測方式：干濕球方式

1.2 溫濕度范圍：- 40℃~ + 90℃ / 10~98%RH

1.3 溫濕度波動度: ≤0.3℃/±2.5%RH;

1.4 溫濕度分布: ±0.75℃/±5.0%RH;

1.5 溫濕度誤差: ±2℃/±3.0%RH;

1.6 溫度速率: ≥2. 5℃/Min( -30℃~+70℃/上下循環，全程平均，) ;

                    濕度上升時間:：20℃至80℃<30分鐘；

                    濕度下降時間:：20℃至-30℃<60 分鐘;

1.7 噪音:  ≤65dB

 

1. technical parameters

 

1.1 temperature and humidity detection methods: dry and wet bulb.

1.2 temperature and humidity range: - 40 C ~ + 90 C / 10~98%RH

1.3 temperature and humidity fluctuation: less than 0.3 degrees C / + 2.5%RH;

1.4 temperature and humidity distribution: + 0.75 C / 5.0%RH;

1.5 temperature and humidity error: + 2 C / + 3.0%RH;

1.6 temperature rate: greater than 2.5 /Min (-30 ~+70 C / up and down cycle, average).

Humidity rise time::20 C to 80 C <30 minutes;

The humidity drop time is:20 to -30 <60.

1.7 noise: less than 65dB

 

2.結構技術參數:

 

2.1內部負荷：重量1500kg大發熱量6KW (540KW*6臺整機+168KW*10臺模組) ;

2.2內尺寸：2700W*2500D*2200H (14. 85m3)大容量16臺產品

2.3庫門：門洞高2200mm，門寬1500mm，對開加附窗口;

2.4內部材料: 不銹鋼板(SUS304)

2.5冷卻方式: 空冷

2.6節能效率: 須搭載變頻器控制

 

2. structural technical parameters:

 

2.1 internal load: weight 1500kg maximum calorific value 6KW (540KW*6 platform +168KW*10 module).

2.2 internal size: 2700W*2500D*2200H (14. 85m3) maximum capacity 16 products.

2.3: the door is 2200mm high, the gate width is 1500mm, the double opening is attached to the window.

2.4 internal material: stainless steel plate (SUS304)

2.5 cooling mode: air cooling

2.6 energy efficiency: must be equipped with inverter control.